Best Way to Patch an Inflatable Pool

Best Selling Inflatable Pool

Swimming is the best way to cool off during the hot summer. But the drive to a beach can be exhausting. And this is where inflatable pools come in. But what is the best way to patch an inflatable pool? And what is it?

An inflatable pool brings the beach to your backyard, providing your family with an effective alternative to spend your summer afternoons. However, a leak in your pool can get in the way of your properly planned fun family time.

Usually made of vinyl, inflatable pools and toys are easy to move around and play with, but their lightweight construction and design make them susceptible to tears that can reduce their lifespan. In addition, the pool may collapse under the weight of the water.

For this reason, you must know how to fix the leaks on your inflatable pool. But first, you need to identify the leak to repair it.

How to Locate a Leak on Your Inflatable Pool

Imagine walking one day to gallons of water spilling in your backyard from your pool. Scary, right? What’s worse? The leak could be anywhere, and it could take ages for you to see it. Luckily for you, we have a few tricks to help solve your predicament. Let’s dive in.

1. Use a Soap Mixture

The easiest way to identify a hole in your pool is by creating a soap water mix. It would be best if you then used a spray bottle to squirt the area of concern. Alternatively, you could spread the mixture from a bucket.

The soapy mixture will create air bubbles once it’s in contact with the area with a leak. Ensure that you have enough air pressure in the pool; otherwise, you won’t see bubbles.

To ascertain that you have the right spot, spray and wipe the area a couple of times. You can then mark the spot to know where to apply the patch.

2. Submerge the Inflated Pool in Water

Drain the pool, then submerge it in a large tub. You should then watch out for escaping bubbles. This will indicate the exact location of the hole.

How To Patch Inflatable Pools

So what happens when you identify leaks on your pool? You cannot stop there. You now need to fix the leak. Not sure how to go about this?

The following are ways to repair your pool;

1. Apply a Temporary Fix

A temporary fix helps you use your kiddie pool within the shortest time possible, as it’s quick and easy to apply. However, it may compromise its lifespan.

Here is a step by step guide on how to apply a temporary patch;

Step 1: Locate the Hole

Using a soap mixture or submerging the inflated pool’s edges in water, identify the leak.

Step 2: Dry the Surface

Once you identify leaks, dry the area of concern completely.

Step 3: Apply Duct Tape

Applying a piece of duct tape over the leaks will temporarily fix your pool as you work towards a permanent solution.

2. Apply a Permanent Patch

Your inflated pool does not have to go out with the rest of the trash simply because it leaks. You can permanently patch the hole to increase its life while saving money to purchase a new one. Here is a guide on how to apply permanent patches;

Step 1: Search For Leaks

Find the parts of your pool that will require patching using the submerging method or the use of a soap mixture. Remember to mark every site with a hole or a crack to make patching easier and less time-consuming.

Step 2: Gather The Necessary Tools and Materials

For a permanent fix, you should equip yourself with tools such as vinyl repair glue and a PVC patch, to mention a few. In addition, most pools come with a patching kit and material that you can use to fix holes and tears when they occur on your above-ground pool.

If you lack or have misplaced the kit and materials, you can find them at most sporting goods stores or even get them from Amazon.

Step 3: Drain The Water

You want your PVC patch to hold up and be more permanent. This can only be achieved if it is applied on a dry site. Therefore, ensure that you first drain all the water from the pool.

Now, if you have a large pool, one whose inflatable ring is above the waterline, you can dry the area with a hole as best as you can without draining the water.

Step 4: Cut The Patch

You do not want to constantly check whether your patch is peeling off each time your family visits the pool on a hot afternoon, right? Therefore, ensure that you cut the patch so that at least two inches of the seal will contact the inflatable pool material on each side of the hole. This ensures that the patch sits firmly on the pool.

It is worth noting that sharp or angled edges on a patch do not hold up over time. So, if you are using a square patch, you’ll want to cut rounded edges on each corner.

Step 5: Dry and Clean The Patch Area

A patch will not hold up on a wet or dirty surface. Therefore, before you apply the seal, clean the surface to get rid of dirt and debris that may get between the patch and the pool top. You could clean the surface using rubbing alcohol or any other sanitizing cleanser readily available on amazon.

You should then completely dry the area onto which the patch will be applied.

Step 6: Inflate The Pool

If you apply the patch on a deflated pool, it will stretch and pull off while inflating it after repairs. To guarantee quality results, apply the tape while it is in its normal form while on use. So it would be best if you inflated your pool before applying the patch and glue.

Step 7: Apply Vinyl Glue

You should apply a thin layer of vinyl glue to the dry affected area on the inflatable pool, and the back of the patch area pressed onto the pool. This ensures that your patch holds firmly onto the pool, even when you fill it with water.

Step 8: Apply The Patch

After applying glue, you should then firmly press the PVC patch or duct tape onto the leak of your inflatable pool. You can keep applying pressure on the patch for about 10 minutes to ascertain that the leak is completely sealed.

You can add glue at the edges of the patch after you have applied it to give your pool that permanent patch fix.

step 9: Leave It To Dry

After applying the patch on the hole, it is good to give the pool enough time to dry before filling it back with water. This ensures a tight seal and reduces the chances of repeating the whole process once again, saving you time and money.

How To Prevent Leaks In An Inflatable Pool

father daughter having fun beach while floating airbed

Having to repair your pool constantly is exhausting and can ruin your family’s fun times. Why not avoid the leaks altogether? Here is how;

1. Use a Protective Above Ground Pool Tarp

Before installing your pool, you will often clear the ground to remove sharp rocks, pebbles, sticks, and tree roots, to mention a few. After that, however, the ground settles due to the pressure brought about by all the water weight you put in the pool. And this is where a protective ground covering blanket comes in.

The tarps will protect your pool from tears and pricks from the rocks, sticks, and pebbles on the ground, reducing tears. Most inflatable pools come in the tarps upon purchase. If your pool doesn’t come with one, it’s cost-effective to purchase something to lay between the ground and the pool, even if it’s just a standard camping tarp. Alternatively, you can order one on amazon.

2. Avoid Sharp Pool Toys

Pool Toys

Your little angels do not just look forward to swimming on a hot summer afternoon. They will want to bring their toys to the pool too. Therefore, you should be keen on choosing their toys to ensure they do not use sharp ones that end up piercing the pool.

3. Keep Pets Off Your Inflatable Pool

Avoid pets on inflatable pool

Sure, you want your pup or cat joining as you take a swim. But the aftermath is often undesirable. The pets may end up pricking the pool, and you have to spend countless hours fixing it. Therefore ensure that you keep them off the swimming area to avoid holes in your inflatables.

4. Use Safe Lawn Maintenance Equipment

So you have to clean your backyard every once in a while. However, doing this can pose a danger to your pool and potential holes, especially if you use sharp maintenance tools. Therefore, ensure that you opt for safe lawn maintenance equipment.

For instance, you could use a cordless leaf blower instead of a sharp rake to clean your backyard. You could further avoid getting too close to the pool with your maintenance equipment.

5. Store The Pool Properly

When storing the pool away for the winter, be careful when folding, bagging, or boxing it. The same goes for when you take it out again. Also, check your workspace for sharp or jagged objects.

Frequently Asked Questions

If you own a kiddie pool, you will often come across a hole on it every once in a while. Here are some of the questions most people who have faced the same predicament ask.

1. Can I use duct tape to patch an inflatable pool?

Yes, you can use duct tape to patch a pool temporarily. However, the duct tape will not hold up very long, and a more permanent patch will need to be applied in a short time. Therefore, patching a pool with duct tape is not recommended but can work in a pinch for a temporary fix.

2. Can I let my pet swim with me in an inflatable pool?

Unfortunately no! Unless you like fixing holes. Pets will prick the edges of your inflatable pool, necessitating that you spend long hours fixing it.

3. How can I quickly fix a hole or crack on my inflatable pool?

Use duct tape. Locate the area with the hole, then clean and dry it. You should then apply duct tape to the affected area. It is worth noting that using duct tape is a temporary fix. You will have to work on a permanent patch to guarantee a more durable solution.

4. How do I identify a hole in my Inflatable Pool?

Use a soap mixture to spray the edges of the pool. The soapy mixture will create air bubbles once it’s in contact with the area with the hole.

Alternatively, you can submerge the edges of your pool in water. Watch out for escaping bubbles, as this indicates the exact location of the hole.

5. How can I Permanently patch my inflatable pool?

Locate where your pool has sprung a leak and clean the surface area completely. Once dry, apply your vinyl repair glue to the torn area and the back of the patch, making sure not to use an excessive amount. Then, firmly press your patch to the hole and hold it there for roughly ten minutes. Allow the glue to dry for 12 to 24 hours before filling your pool back up with water to ensure a tight seal.


Purchasing an inflatable pool for your backyard is a necessary expense during summers. It gives your family a place to relax and cool off. However, a hole in the pool can jeopardize that.

Instead of throwing away the pool with the rest of the junk, locate the hole, dry the area and apply glue. Finally, cut the patch and apply it to the site with the leak. Give it time to dry before filling the pool with water, and voila! You have fixed your inflatable pool.

1 Comment
  1. […] big is an above-ground pool? If you are considering purchasing an above-ground pool, you must keep in mind the size. This […]

Leave a reply

Smart Straw
Enable registration in settings - general