Brita Longlast vs Standard Water Filter

Best Selling Brita Longlast

Using a water filter is one of the easiest ways to get clean drinkable tap water. With the many great filter brands in the market, getting the best filter to filter your tap water for daily drinking in your home or office can be challenging. Regardless, the Brita brand has been consistent in creating impressive water filters.  As such, we compare Brita’s Longlast against the Standard water filter. Without a doubt, the Brita brand does carry some weight, so let us see what these two water filters have to say for themselves.

 

Brita Longlast Water Filters

Every Brita Longlast water filter offers you one of the easiest ways to get clean pure water in the comfort of your home or office. However, the constant changing of filters like the Brita Standard can be annoying. With the Longlast filter, Brita has managed to triple the lifespan of their water filters. In fact, you only need to change the filter twice a year, it isn’t such a hassle!

  • 6-Month Lifespan

The Longlast is designed to live up to its name. Each Longlast water filter is designed to filter water for six uninterrupted months or up to 120 gallons of water, whichever comes first. You only need two filters for every year. As such, you won’t spend as much as you could on replacing filters like the Standard.

Besides, you can buy your Longlast filters in singles or packs of two. The pack of two will come in handy to provide your family with clean pure water throughout the year.

  • Removes Several Contaminants

The Longlast filter outclasses the Brita Standard and several other filters in the market based on the number and types of contaminants it removes. You will be using your Brita Longlast to filter tap water for drinking, so it is designed to remove contaminants commonly found in tap water.

During water treatment, chlorine is used. However, it leaves a bad taste and odor in water, and you wouldn’t want to ingest it. Besides, copper and lead leak into the water from the corroding pipes, while mercury gets in when our water sources are tainted with agricultural or industrial runoff or sewage.

However, the Brita Longlast filters are designed to eliminate up to 99% of all these contaminants to provide you with clean and safe drinking water.

  • NSF/ANSI 53 Certified

A water filter should have an NSF/ANSI label that shows it meets the strict health and sanitary standards. The certification lets the consumers know that the product has gone through rigorous testing and is safe for use in filtering drinking water by removing eliminating contaminants.

With the Brita Longlast and Standard, you won’t have trouble locating the NSF/ANSI label. Both filters have been listed as NSF/ANSI 53 certified on their website.

  • No Pre-Soak Required

The Brita Longlast filter offers a simple and easy way of use. Its fine meshes, absorbents, and fibrous matrix do not require to be saturated in water before installation. Ideally, you simply pop it into your Brita filter and in seconds, you will have perfect filtered water to drink.

  • Does Not Filter Bacteria and Virus

The Longlast has plenty of things it does better, but it also has some drawbacks. The biggest drawback is that it doesn’t remove bacteria. Therefore, you need to filter water that has already been treated for bacteria and viruses.

Brita Standard Water Filter

  • Two-Month Filter Life

Every Brita Standard water filter offers a lifespan of about two months or up to 40 gallons. In comparison to the Longlast, this lifespan doesn’t seem quite impressive. Regardless, with 40-gallon filtration capacity, you stand a chance to get about 640 cups of clean pure water or the comparable of between 64 and 128 pitchers of water-based on Brita’s line of compatible pitchers.

  • Eliminates 4 Contaminants

With the Brita Standard water filter, you expect it to get rid of all the most basic water contaminants from your tap water. Like the Brita Longstand, it removes cadmium, chlorine (taste and smell), zinc, mercury, and copper.

However, it won’t get rid of heavy metals like lead if your water is contaminated with it. However, this shouldn’t be a problem around the globe, especially if you don’t draw your water from a well.

  • Discard First 3Pitchers – 30 Cups

Like the Brita Longlast, the Standard doesn’t need a pre-sock to activate the filters and metal-attracting meshes. However, it does leave a carbon residue after installing a fresh filter. Therefore, to remove this carbon residue you will have to dump out the first 30 cups or three to six pitchers based on the Brita pitcher model. Consider using cold water to remove the extra carbon dust from the interior of the filter.

  • Compatible with all Non-Stream® Pitcher

Brita has many models of excellent water pitchers to choose from. The Stream® line is one of the most advanced and does not require pre-soaking or throwing out the first couple of filtered water to get the filter fully activated.

But the Brita Standard like the Longlast does not fit in the Stream® pitchers, you will need a Grand, Metro, Everyday, or one of the several lines of pitchers that is compatible with the filter.

  • Ineffective against Bacteria or Viruses

The Brita Standard and the Longlast are great water filters that anyone can have. However, they are not designed to eliminate bacteria and viruses from your tap water for drinking. The bacteria and viruses do not cling onto the activated carbon filter. So they will pass through freely.

FAQs

Q: Are Brita filters effective?

A: Water filters work differently based on what contaminants they are designed to remove. A filter can be designed to eliminate microscopic parasites from entering your jug and leaving other components of water to filter through. The Brita Longlast and Standard come with a National Sanitation Foundation certification that you can use to see the type of water contaminants they filter out.

Q: How often should I change my filters?

A: Brita recommends that you change the Longlast filters every six months and the Standard at least after every two months. Also, this means that you can filter about 40-120 gallons of water before a new filter is needed.

Q: How does the Brita Standard filter work?

A: The Brita Standard filters are designed to work like a sieve. They use carbon to reduce mercury content and chlorine taste and smell from water.

Equally, there is an ion-exchange resin that works to filter copper, zinc, and cadmium. The Brita filters are designed with pores that control the components that filter through. Since the pores come in different sizes, they entirely affect the filtration results.

Brita Longlast vs. Standard Water Filter: Which Should I Get?

Now that we have seen what the Brita Longlast and Standard has to offer, we can give a definitive answer regarding which of the two filters is a better overall filter. Choosing which would be your better option entirely depends on the type of contaminants you have flowing with your tap water.

If you feel the Standard’s contamination elimination capacity isn’t enough, then the Longlast may be the solution. But, if the lead metal isn’t one of your water problems, then the Standard would be the most cost-effective even with its shorter lifespan.

2 Comments
  1. […] water filters come with 6 months limited warranty on the manufacturer defects. However, if you register when you […]

  2. […] Sawyer Micro is the newest Sawyer filter in the model of portable hollow fibre water filters. Theoretically, the Micro combines the […]

Leave a reply

Smart Straw
Enable registration in settings - general
Smart Straw We would like to show you notifications for the latest news and updates.
Dismiss
Allow Notifications