How To Drain a Utility Sink In the Garage

Best Selling Sink

Do not worry if your utility sink clog. Utility sinks frequently clog due to the nature of activities that happen there. There are ways to know your sink need to be drained especially if the sink runs water slowly. Sometimes calling experts to drain the sink for you might be costly, so you need to understand the how-to drain utility sink in a garage by yourself.

You need basic knowledge and the tools necessary to drain the sink. Surprisingly, your sink must not clog all the time, some measures can help you avoid such problems.

At the end of this article, you will know how to drain a utility sink in the garage.

Tools Required To Drain Utility Sink In Garage

1. Rubber Gloves

You need gloves to handle the drain pipes. You may not know what caused your sink to clog. Handling the plumbing system with bare hands might cause complications in your skin.

2. Bucket and Flashlight

You badly need a basket to pour water into the drain pipes since you cannot use water from the faucet. The source of water is stopped before you start working. Flashlight serves the purpose of torching inside drain pipes. The pipes are dark inside and you cannot operate without knowing the clogging items.

3. A Plunger and Petroleum Jelly

This tool is mostly used clear clogs fixtures like sinks, tubs, and toilets. Always keep the tool near your garage to avoid inconveniences in case of sink problems. The petroleum jelly help nuts to open with ease and clears rust as well.

4. Baking Soda, Vinegar, and Hot Water

When baking soda reacts with vinegar, the solution helps to loosen the pipes and also cleans sinks naturally. Hot water helps to clear the solution from the plumbing system.

5. Plumber’s Snake and Used Rags

The plumber’s snake collects the farthest clogs in a drainpipe. Locating clogs naturally might be hard, therefore the need for the plumber’s snake around your garage to scoop the farthest clogs.

6. Electric Power Auger

Some materials blocking your sink might not be near such that they cannot be located by a plumber’s snake. The electric auger effectively picks them and helps you to clean the sink.

What To Do To Drain Your Sink

Before starting work, ensure you wear gloves to avoid touching clogs with empty hands. Beneath a sink, you find a drain cover. Remove the cover and start your operation.

Follow the instructions below to see yourself successfully drain your vent.

1. Pick Clogs by Hand

You can pick visible dirt by hand. Maybe your drainage blogged because of simple stuff. Use a flashlight so that you can see the drain pipe well and scoop any material you come across as you through into your bucket.

2. Use A Plunger

Utility sinks are designed to be cleared with a plunger, so if one is available, that should be the first option. Unlike bathroom sinks with overflow drains or kitchen sinks with a side branch, garbage sinks lack a way for the plunger’s pressure to escape.

Sink plungers are red-rubber suction cup plungers with a comical design. Although garbage plungers can be used on sinks, many households prefer to have separate plungers for different tasks.

Plunging a blocked utility sink is simple and straightforward in any event. If there isn’t any water in the basin, add some to increase your plunger’s chances of success. The suction will be able to push the water against the clog, breaking it down and allowing it to flow away.

3. Use Plunger’s Snake

Push the handle up and down repeatedly for about twenty repetitions. This should clear the blockage, but if normal water flow does not return right away, repeat the process a few times more before switching to another approach.

Utilize the towels to clean up any and all mess generated during your job.

4. Use Baking Soda, Vinegar, and Hot Water

You need to break the hard clog by using baking soda, vinegar, and hot water.

Pour hot water in your sink to run down the drainpipe.

Form a solution of baking soda, vinegar, and water each one cup.

Give it some time, at least five minutes, and then pour hot water to clean the sink.

5. Destroy Drain Pipes

The u-shaped drain pipe beneath the sink may be easily removed to allow the debris to flow into a pail below it. It should be removed and cleaned. If the clog persists, insert a pipe snake into the pipe that connects to the u-pipe. Replace the pipe after it has been unclogged, and tighten all of the nuts.

Sign Of Clogged Drains

1. Water Flows Slowly

One of the main observations when your drainage clogs, is the inability to run water as usual. The clog is frequently caused by a buildup of soap scum. Cleaning on a regular basis keeps the buildup at bay and prevents obstructions. Liquid cleaners aren’t very effective, are dangerous to use, are bad for the environment, and can really damage your plumbing.

2. Smelly Sinks

Another sign of clogged drainage is a bad smell. You discover odor from far. The bad smell comes from waste that stays for a long time around the pipes.

Other times, the smelly line can be caused by a dried faucet. To test the cause of the smelly drain, allow water to run through the sink for some time and observe if the smell disappears. If it does not, your drain pipe is clogged.

Clogged food particles or even a mouse that tried and failed to get access to your home through your plumbing could cause a stinky pipe. You may have an expert look at it in any case.

3. Gargling Pipes

Drain pipes produce an annoying sound that is heard from the sink faucet. It indicates that air has become trapped in your pipes, which could be due to a clog further down the line, a clogged vent stack, or a problem with your main sewer line.

4. Mysterious Puddles

Sometimes you can discover spots of water in your house. You may wake up in the morning and find puddles in different corners which you have no idea where they come from.

In most cases, tree roots cause the puddles. Tree roots may wreak havoc on your plumbing, so if you suspect this, call your plumber immediately.

Ways to Know Utility sink in Garage Need To Be Drained

Sinks do not just clog. If there is nothing stopping water from running through pipes, then the drainage takes place smoothly.

Check keenly the causes of drain blockage below.

1. Functionless Sewer Drains

You might discover unusual behavior of water flow in your sink. Water runs slowly in the pipes.

Additionally, when you open your faucet, you hear a gurgling sound.

2. Iced Drain Pipes

If you wake and find your line blocked especially on a cold morning, your drainage system might be having ice.

You can prevent your pipes from the cold breeze by covering them with an escalator and insulator.

Leaving the pipes uninsulated causes the pipes to break. Once the pipes break, wastewater leaks. Your plumbing is exposed to foreign material when the pipes break.

3. Crystals In The Pipes

When sugary liquid, urine, and soap leaves crystals as they flow through the pipe. The crystal forms a solid crystal substance that blocks drainage. Removing the crystal by yourself might not be safe. Call a plumbing expert to fix your problem.

Clog Drainage Preventive Measures

1. Avoid pouring food leftovers into your sink

Sometimes, you might decide to dine outside your house and maybe nearby your garbage. Temptations of washing your dish direct without disposing of the leftovers might happen. It is a good idea to install a sink in garage.

2. Use petroleum grease regularly

The oil helps a smooth flow of water in the pipes. Ensure you clear the great after it cools. Throw away the grease if you have used it for a long time. New grease can be recycled for next use.

3. Ensure you cover pipes with insulators

During cold seasons, your pipes lines might freeze and break. You need to take care of your pipes because purchasing new ones might be expensive.

3. Always check your sewer drains

The utility sink in garage has sewer drains are located at the lowest part of the plumbing system. Ensure they function properly to facilitate easy flow of wastewater out of your house.

4. Try as much as you can to minimize crystallization

In case the crystals form a solid substance, immediate action is required. After using soap or pouring sugary substances in your sink, pour a lot of water to carry the crystals away.

Frequently Asked Questions

1. What should I do if I fear roots are clogging a drainage pipe?

Tree roots can clog drainage lines and prevent sewage from leaving the garage sink. Overflowing drains and even burst pipes are the outcomes of this. Older clay pipes are more vulnerable to tree root damage and may need to be replaced with PVC pipes.

2. What if the plumbers are unsure of the source of my drainage problem?

Unfortunately, the majority of your drains are hidden. That means it’s difficult for a plumber to figure out what’s wrong if the problem isn’t obvious. Drainage professionals can examine your underground pipes more closely with a CCTV survey.

3. How can I keep my drains from becoming clogged?

There are a few easy techniques to keep your drains from becoming clogged. Installing a plug hole strainer in your sinks and shower, and scraping off plates and pans before washing them in the sink are all simple actions to take.

Furthermore, instead of pouring oil down the vent, pour it into a leftover bottle or jar and discard it in the garbage; otherwise, the oil and grease would solidify and clog the drains.


Draining a utility sink in your garage is simple. Following guidelines in this article will help you learn how to drain a utility sink in the garage.

Having a utility sink in the garage calls you to have some tools like pipe snakes, plungers, and other outlined equipment.

The knowledge of how you can clean the utility sink matters a lot. In case your sink clogs when an expert is not available, try a DIY method.

Additionally, there are reasons for the clogging of drains. One of the reasons being the crystallization of soap, sugary liquid, and urine.

Finally, put into consideration the preventive measures.

Smart Straw
Enable registration in settings - general