How to Force Drain Speed Queen Washer

Best Selling Queen Washer

speed queen is a brand that makes washing machines mostly for heavy commercial use. speed queen commercial washer like any other washing machine is sometimes prone to technical hitches or breakdowns depending on the nature of the problem. The most common problem that speed queen washers face is the inability to drain water.

It is a normal occurrence that water can get logged in any washing machine and that does not mean your machine has completely Broken down. If you have been facing a problem whereby your speed queen washer retains water as you wash, this interesting read will equip you with the necessary skills that will enable you to sort out this problem and ensure that water can drain properly from your washing machine every time you are done with laundry.

How do I know that my speed queen washer is water clogged?

Sometimes your washing machine can develop a problem without your knowledge or dim the problem as normal. Here are the signs that will act as a red alert that your washing machine is developing drainage problems.

Your speed queen washer is making a loud noise

Loud noise than normal is a clear indicator that your washing machine is suffering an eminent breakdown and may not be as effective as it is meant to be. The loud noise might be an indicator that the drain pump might be clogged or defective.

Small objects or pieces of cloth or socks can get clogged in the drain pump. To determine this, it is advisable to remove the drain pump and check for obstructions.

If large amounts of water get stuck in your washing machine’s drum, then it is the most automatic second indicator that your washing machine is facing drainage problems.

Supplies needed to drain your washing machine

If your washing machine has developed a drainage mishap in the middle of a rinse cycle, worry less, this problem is fairly simple to fix. You simply need the following supplies to enable you to drain water from the drum of your washing machine as you continue with troubleshooting to have your washer back to normalcy.

  • A bucket preferably 5 gallons that will accommodate all the water from the drum of your washing machine
  • Needle nose pliers. The needle nose pliers will enable you to clean a clogged drainage pump
  • Towels. Towels will enable you to completely dry the drum after successfully emptying all the water.
  • User manual. Users’ manual is optional but a very important document with a set of instructions that will enable you to maneuver the machine appropriately
  • plumber’s snake. The plumber’s snake will enable you to unblock a clogged drainage hose easily.


To identify the root and cause of the problem, one has to use the above supplies to troubleshoot the problem and find the best remedy for the drainage problem in your washing machine. Before you diagnose the problem you first need to drain all the water manually to enable you to work on your washing machine with much ease.

How to manually drain a speed queen washer


Before you manually start to drain a speed queen washer, make sure that the lid is completely closed. speed queen washers will only drain water if the lid is airtight. If still after closing the lid draining does not kick start, then follow each of the following steps to help you get out from where you have been stuck.

Step 1: Turn off the power and lay towels on the floor

you are required to first switch off the power button on of your washing machine and unplug the power cable and disconnect it from the power source. Ensure that the power cable is properly handled to prevent it from getting into contact with water. All these precautions are meant to protect the user and the machine against electric shock and machine damage.

Towels are laid down to absorb leaking water and make the working area tidy in case of any spills.

Step 2: Locate the drain hose pipe at the back of your speed queen washing machine

The drain hose is found at the back of a washing machine alongside the other two hoses necessary for supplying both cold and warm water. To ensure that you safely reach the drain hose, pull the washing machine away from the wall. This will enable you to create enough working space.

Sometimes it may prove difficult to locate the drain hose pipe if you lack the user manual. Worry less. The drain hose is grey and is responsible for taking water out of the washing machine. The cold and hot water hoses are commonly coded in blue and red in color respectfully.

Washer inlet valve hose removing

For safety, make sure to turn off the water supply into the washing machine by turning the red and blue knobs anti-clockwise.

Step 3: Drain the water

Depending on the user’s installation, washing machines can be configured to drain water into either a standpipe, a drainpipe on the wall, or a nearby sink or septic tank.

You are required to disconnect the drain hose from the pipe and lower it into a water bucket. If the water level is higher than the level of the bucket, water will freely flow out through the natural force of gravity.

If your drain bucket becomes full before draining is complete, then you are again required to reconnect back the drainage hose to the drain pipe. This process should be repeated till all the water is drained.

If the level of water in the washing machine goes below the height where gravity will not work upon on, you are required to use a smaller bucket or use another hose pipe to siphon all the water from your washer. Drain the inside of your washing machine with all the water by use of a towel.

Step 4: Check for drainage hose clog and drain pump clog

How to Replace a Washing Machine Drain Hose |

It is very possible to find out that after disconnecting the drainage hose pipe from the drainage pipe, still, no water flows. This means that the problem is within your washing machine.

use a plumber’s snake to reach the blockage and turn it manually with the handles on the opposite end until you successfully unblock the drainage hose.

As a precautionary measure, water might jet out forcefully due to the natural force of gravity. Your collecting bucket should be on standby to sort you out. Also, the towels you had laid down will help you clean the working area in case that eventuality happens.

If still, no water gets out after checking on the drainage hose, it is now evident that the clog is emanating from the drainage pump.

Step 5: Consult a pro

Sometimes your efforts can bear no fruits. That does not mean that your machine is completely down or you bought a bad brand. Give it another shot by Consulting a pro which is among the last options to drain water from your washing machine.

It is necessary to take this step since the diagnosis of the problem has gone beyond your knowledge. A pro will help you drain water from your machine and as well do your machine maintenance.

What is causing drainage problems in your speed queen washer?

In case you fail to diagnose a problem ailing your washing machine, here are a few tips that will help you understand problems related to a washing machine and how they directly affect the drainage system of your washing machine.


Clogs are caused by small pieces of cloth or socks stacking in the drainage system of your washing machine. when the drain pipe cannot be able to eject these clogs they block the system hence no water can be drained from your washing machine when washing your clothes.

Removing clogs from a drainage pump

About Your Washing Machine Drain Hose Connections And Maintenance

Different models of the speed queen washer have different locations of the drain pump. The drain pump might be located behind removable panels or underneath the washer. this requires you to tip the washer forward to access the washing machine drain hose and the inlet hoses mounted with two spring clamps

Once the pump has been located, remove the spring clamps by use of a pair of pliers. Wash out the clog with a pair of needle nosed pliers and correctly return the hoses to their original place.

Precautionary measure

Since machines are prone to tear and wear, constant opening and closing of the washing machine eventually will wear off your load washer. To prevent further clogs, ensure that you wrap your clothing in enough towels such that even the smallest load like socks gets out of the washing machine.

still, if you cannot afford to take that precautionary measure, it is advisable to hand wash your small loads to avoid tearing your washing machine.

2. Rickety drive belt

Genuine BOSCH Washing Machine Drive Belt - 1180J4 264987 : Large Appliances

The drive belt works closely with the pulley by drawing energy from the drive motor whose main function is to ensure that the belt will spin the washer’s tub.

whether you are using the speed queen washer to wash or dry your fabric, movements of the belt will ensure that your purpose has been fully achieved.

For the belt to work effectively, it must be tenacious such that it spins with enough power. as time goes by with continual use, the belt wears out and reduces the tension grip needed to do its job. This can be noticeable when loading the machine with a load hence cannot be able to eject water from the washing machine. The logic here is that it simply becomes oversize.

Necessary precautions when replacing a rickety drive belt

To ensure that this appliance lasts, one can replace the drive belt even though it takes much effort and technique. To replace this, you need instructions found in the user manual to avoid unnecessary mishaps.

With the speed queen washer, the belt is located way below the unit. This requires your efforts to remove the panel and other parts to access the drive belt.

How to install a new drive belt

After successfully locating the drive belt location, It will prove to be very easy to remove the old belt but hectic to replace a new one due to its tautness. You will be required to loop one end of the belt to the drum pulley and then pull with force to connect by hooking the other end of the belt around the motor pulley again.

After the basic installation, you are now required to turn the washer manually to align the belt properly by putting it into place on both pulleys.

3. The Door Lock Motor and Switch Assembly mechanism

General Electric WB14T10018 Door Lock Motor and Switch Assembly - -

The door lock helps to lock the washer door during the washing sessions. The washer won’t start if the washer door wont open. This is due to the effect of the door switch which prevents the washer from operating. The washer won’t equally spin if the door is unlocked. This means that if these features fail no basic operation will take place and so your washer won’t drain the water either.

Replacement of the Door Lock Motor and Switch Assembly mechanism

Samsung Front Loading Washing Machine - Door Will Not Close or Lock

If your washing machine has failed to eject water from its system, have no worry. The door lock and switch assembly mechanism are replaceable. You first need to unplug the power cable from the main power supply. This measure is set to protect you against electric shock. Also, wear hand gloves as an extra cautionary measure.

Use screws to open the top panel and gently pull the top panel towards the back of your washer and lift it up to remove it. then finally remove the door and lock assembly.

In case the door is locked, you are advised to use a knife to remove out the white latch on the door lock assembly to open the washer door.

Finally, put the door lock assembly out and disconnect the wires to install a new door lock assembly which will ensure that your washing machine works. Install the top panel and tighten it with screws. It is good to note that screws should not be overtightened. With these simple steps your washing machine will work optimally after you have replaced the power cable.

4. Faulty coin trap


speed queen washing machines have a coin trap whose responsibility is to trap foreign materials that penetrate to the drain incorporated in them. The coin trap is set to block if it is not checked and cleaned on regular basis.

If dirt continues to accumulate in the coin trap, it will be blocked and the washing machine will not be able to drain the water properly or block it completely.

Unblocking a washing machine that has been blocked at the coin trap is one of the simplest things to do. The coin trap is easier to access since it is located just below the door and you can open up anytime and remove the cap together with the filter if you are in for your routine machine maintenance.

In conclusion, draining water from a clogged washing machine can be very hectic and tiring in equal measure. Conducting constant checks and maintenances will save you the hustle of unblocking a washing machine.

We will be happy to hear your thoughts

Leave a reply

Smart Straw
Enable registration in settings - general