How to Put Up a Swimming Pool

Best Selling Vinyl Pool Liner

Swimming is many people’s hobby. It’s a healthy exercise too. If you’re a swimming fanatic, having your own pool can make your hobby so fulfilling. You can swim anytime you want to, whether during the day or at night.

Above the ground, swimming pools appear too complex, and the thought of constructing one can be daunting. However, above ground pools are super easy to put up.

You only need a weekend with your family members as helpers, and you’ll have an above the ground swimming pool. After all, above the ground pool installation services are very costly.

Want to spare yourself these expenses? Read on to discover how you can set up an above the ground pool:

Choose an Ideal Location

A suitable location for an above the ground swimming pool is a number one priority. Once you construct a pool, you might not undo it. Therefore, you must get your location right.

Choose a level flat surface when you need an easy to prepare the location for your pool. However, a sloping hillside also makes a good location.

You can easily cut onto that hillside and put up your retaining wall, be it block or timber. Ensure you give these walls at least ten feet distance from the pool’s walls before you erect the slope.

Choose a location that’s close to water. This way, you can easily use your garden hose to fill up your pool with water.

A location close to a power supply can also be perfect. You’ll need a well-grounded outlet to plug on your pump.

Choose a site close to the house or one that you can clearly view from your house. Such a site feels more fan and comfortable. You can easily leave the house and dip yourself in the pool. This nearness also gives you the privilege to enjoy watching and cheering your loved ones as they swim.

Your pool site should not be encroaching as much as you should locate t closer to easements and setbacks. A sunny location is necessary. Avoid sites with overhanging trees.

You need the sunshine to cheer you up and dry you up when you take some breaks from the water. Sunshine can also reduce your expenses of warming up the water.

A good above the ground pool location has good drainage. The range should be good both around the pool area and away from the pool. Stagnant water can be unhygienic and can make your above the ground pool uncomfortable.

Gather Relevant Tools

You need some tools to construct an above the ground pool. You need some drills and three people to help you out.

You also need a hosepipe to fill up your pool with water. Get a measuring tape, a wheelbarrow and a carpenter’s leveler.

Similarly, you’ll need different tools for different stages of setting up your above the ground pool.

For Excavation;

Excavation is the first stage of constructing a swimming pool. The process involves marking around the area where you want to set up the pool.

Marking out the area with accurate measurements can make it easy for you to dig. However, before you start digging your above the ground pool boundaries, contact the dig hotline.

You need to know from these dig experts whether there are gases or electricity lines under the ground you want to excavate.

This also increases your safety. Use a string to mark the pool’s boundaries. Mark the whole layout round above the ground pool to ease the excavation process.

You can use an earth moving machine or a backhoe based on their availability. Use shovels to shape around the pool’s dimensions. Alternatively, you can use a sledgehammer, some rakes or a pickaxe for shaping.

While at this stage, your tape measure, wheelbarrow and transit leveler will be a must-have close by. It can also help if you gather all these tools before the exact excavation day. Stopping the digging to get a wheelbarrow can be interrupting and time-wasting.

You also need the right gear for this activity. You must wear your gumboots, an overall, and a pair of quality gloves to prevent blisters. You’ll also need your knee pads and a construction hat.

To be safer, get a tarp to cover your excavation area if rains start pouring as you continue with the construction.

For Wall Construction

Once the pool area is level, you can get started with putting up your swimming pool walls. Furthermore, the compactor you use for excavation will most likely tamper with the ground surface.

Therefore, you must shave the ground until you are comfortable it is level enough. For this activity, you’ll use your extension cord, the rubber mallet, screwdrivers, carpenters, revellers, drills, roofing shakes, shims and shovels.

All these tools can help you level up the pool walls. You also need a putty gun and a waterproof caul. They’ll ease your installation of a pool coping.

For Plumbing;

The construction of an above the ground pool involves some plumbing activities too. To facilitate plumbing, you must have channel pliers, and a hack saw. A hole saw is also essential. A meter box can ease the making of straight cuts on your pool’s pipes.

Alternatively, you can use DIY pool builders to make your pipe cuts. A reciprocating saw can also help you cut your pipes.

Have some sandpaper for smoothening your pipe ends after you make the cuts. Likewise, get a fresh PVC glue to help you with appropriate joining. A primer is also a must-have at this stage.

For Floor Installation;

You’ll need vermiculite to help you lay the base of your swimming pool. Trowels, at least five-gallon buckets and a wheelbarrow will also help you big time.

Choose round-edged trowels as they are more convenient to work with. Use a broom to sweep your floor after setting.

Rounded edge trowels are easier to work with. Your knee caps will help you at this stage. Also, have a broom to sweep the pool’s floor before you install the liner.

Clear the pool’s floor of any loose particles before fixing the liner. This will ensure your pool’s floor is smooth and comfortable to step.

For The Liner Installation;

A blower or a shop Vac will be so necessary at this stage. Furthermore, if you prefer lining your pool’s floor with a step section liner, you’ll need a cordless drill. Choose one with a huge Phillips head for convenience.

Similarly, you will require a razor to cut the liner. Cut your liner around the main drains, around the inlets and the drains. Afterwards, you can use an old piece of liner or a tarp to cover your step. A piece of wood can also work.

Extra Tools

You may need some sunscreen as you’ll be out in the sun all day. Some goggles to shield your eyes from dust and too much sunlight can also help. Get a leaf blower to help you blow away those beautiful leaves that may block the excavation site.

A stiff rake is also essential. If music motivates you, then you need your favorite playlist this day. You can also have some cameras and video recorders to capture the special occasion. It can be so exciting to capture each phase of the pool construction.

Building Supplies

You will need a floor base for your pool’s floor. Have a pool base ingredient around. Some concrete and sand will help you set up your pool’s walls. Use concrete to level these bases of your walls.

Get some gravel or sand for your pool’s decks. Use sand or gravel to firm up any muddy areas and to prevent mud pits. This will facilitate the easy movement of trucks within your home compound.

Mud pits can encourage trucks to make deep wheel ruts. These ruts can keep stagnant water and encourage the breeding of mosquitoes.

Mark Your Pool Territory

You have identified a suitable site for your swimming pool and have gathered all the tools you’ll need for the construction.

  • Place your stake at the center point of the ground where you want to install your pool.
  • Slip your tape measure’s end over your stake
  • Measure thirteen feet from the pool’s center to give the pool a twenty-six standard diameter
  • Walk carefully around your pool’s perimeter and spray paint accordingly to mark the pool’s outer circle.
  • Clear your marked area of all grass
  • Remove any uneven soil within your circle using a spade or flat shovels. You can also hire a sod cutter. Do this when you have plans to use the sod elsewhere. Also, be prepared to operate such a beast.
  • Level up your pool site after removing all the rough particles. Use a site level, a line level or a transit level for this particular task.
  • Lay some bricks evenly on all the sides of the pool. Do this at various spots without the pool perimeter to achieve a level surface.

Alternatively, you can lay eight feet across the pool area to measure whether it’s level enough. The carpenter’s leveler can also help you confirm this.

Note that having even a small balance of a centimeter difference on your pool’s sides can hinder the water level on your pool. The water level will ultimately be uneven.

Unfortunately, if the difference s greater, the uneven water levels will impose extra pressure on the pool walls at the higher side of the pool.

Level The Ground

This stage has the most work. If your hillside location or sloping location is contentious, you might need to get some mechanical assistance. Alternatively, you can use a skid steer loader to balance the ground levels.

Fortunately, if you have a fairly level home ground, you can level your pool site with shovels and picks. Use a flat or square nosed shovel to help you shave off all the high spots.

You must not clear the site of all dirt. However, remove all the weeds and rocks using a garden rake. As you level your pool site, trim off all the high spots and have uniform low spots.

It’s easier for you to lower the high spots to get them to the level of low posts. When you heap up the low spots to make them level with the high spots, you’ll encourage loose dirt fills.

To confirm that you’ve achieved a level ground, place your carpenter’s leveler tape to the wood and get a level of eight by eight-length. For your circumference, get an eight inches level from the inside of the pool all the way to the outside.

Once you’ve fully levelled your pool’s floor and all the area around the pool, move your construction substance onto the center point of your above the ground pool or round above ground pool. Choose either vermiculite, sand or stone dust.

Start the construction by assembling the pool’s bottom track connectors. Do this until you achieve a twenty-four circle. Ensure the diameter is similar all around the pool.

Proceed to place the patio blocks under the upright sets of blocks. Gather some stakes at the back of your assembled rail to the ground to solidify the ground surface and stop any movements.

Once you have created a circle, dig down into the ground at an inch’s depth. Place another 8″ x 16″ high pool cove patio block below your pool’s rail connectors.

Ensure your bottom rails sit on the stable ground all around and on each patio block at the connection joints. Continue to level the bottom rail as you move from one block to the next. Ensure each block is at the same and equal level with the other and that your rail is firm all around.

Tamp & Wet

Suppose you have loose soil? You can tamper the sol using your hands or by the use of a motorized tamper. Tamper your soil until it’s fully packed. Your pool will weigh between fifty and one hundred lbs. when you fill it with water.

This weight can only e comfortable on compact ground. Saturate the area where you want to tamper sol. Use a lawn sprinkler to help you settle any loose dirt in one place.

Work on Your Pool Base

You must guard your pool liner to enhance its effectiveness and durability. Therefore, you must top all your bare soil with some compactable material like sand. You can line the base with two inches of sand. Sand feels softer to touch, and you can really and affordably access it.

However, sand’s softness makes it allow some heel marks to develop on your pool’s floor. This creates room for several other floor anomalies. To avoid this, you can use stone dust. Stone dust is highly resistant to shifting and lays flatter than sand.

You can also create a pool floor with a mixture of concrete mix and vermiculite. This will enhance the durability of your floor and harden it to prevent the development of heel marks over time.

You’ll need strings, a carpenter’s leveler tape and stakes to spread the base material. Set the material to an 8′ 2×4 high pool cove dimension. After applying the material, smoothen the pool’s base with wooden floats or trowels.

Tamper the floor using a heavy tampering tool. Use a broom to sweep off all the sediments on your pool base. Remove all the tamping marks to achieve a bottom that’s both levelled and smooth.

Spray some mist on the entire surface of the pool to compress and firm up your pool’s floor. At this point, you can also set up a floor pad to protect your pool liner.

A floor pad can also smoothen the bottom of your pool. Furthermore, a floor pad is resistant to markings and heel divots. A pool liner guard serves the same purpose as floor padding.

Connect The Bottom Rail

Your pool’s bottom rail holds the pool wall up. The bottom rail is a crucial component for pool installation. The bottom rail pieces connect the end to ends where these rails meet at the connector plate. The connectors plates act as your pool base plate.

These plates support the perpendicular posts between your pool walls. They join one end of your wall, all the way around to the other end of the wall.

After you’ve locked all your rails at a central place, take appropriate measurements to ensure your pool the rest of the pool is either oval or round in shape. You can also check your pool’s levels by running some stakes across the entire pool.

Measure the diameter inside the pool. Use duct tape to join one end of the pool to the other. Check whether the duct tape follows a straight line. You can also fix duct tape all around the pool to physically observe whether your pool is level.

Alternatively, you can take these measurements using a tape measure.

Start at one pool base plate to another. Pull your string tightly as you hold the carpenter’s level at the string’s level. Conversely, you can use a shoot laser or transit. Check one patio paver all around the perimeter of the pool. Check the levels of each patio block before you shoot your laser.

Be sure that the floor of your pool is slightly above each respective patio block. This gives your base more support.

Roll Out Your Pool Wall

Your pool wall material should be a compact sheet of laminated steel and galvanized steel. Sellers should roll the material tightly at the time of purchase.

Unroll the material as you concurrently push the bottom of your wall to the track’s bottom to install the pool base. Ensure you have two helpers to help you hold your wall onto the bottom track and stabilize it as you unroll the wall.

Place a piece of cardboard beneath the wall roll to prevent the development of heel divots on the base. This cardboard can also prevent damage to your base as you move the base around.

Make a skimmer cut at the beginning of your wall’s roll. Start the skimmer cut where you want to locate the skimmer. Note that your skimmer cut will be the location where you’ll fit the filter and pump.

Therefore, ensure that your hole fits the filter before you install the uprights. A wider or narrower hole might not hold the filter accordingly. Sadly, after you have set up all the blocks and uprights, you might not be able to adjust the hole.

Soon you’ll have your wall up and standing at the track. Connect both ends of the wall with the bolts. As you do this, ensure the smooth, bold endings are inside the wall for safety reasons. Place the nuts on the outside part of the pool’s wall.

Install all the necessary stabilizers, uprights and the top rail

Secure your uprights. Snap the uprights over the pool base plate at the outside part of the pool wall. Place your stabilizer right on top of the upright. Screw the stabilizer carefully and strongly to the upright.

Place your top rail on top of the pool wall edge. Screw all the uprights onto their perfect locations.

Install some foam as you shall prefer. The foam gives your pool walls a soft touch and helps guard the liner. This foam also protects your floor pad and gives it a nice soft feel.

Install A Vinyl Pool Liner

Request your three helpers to help you drape your pool liner over the walls of the pool. Together with them, clamp the liner in place using some coping strings.

When using a beaded liner, attach the receiver of the need to the top of the pool wall. Snap the edge of the liner onto the track. Place your liner’s box inside your pool and unfold the liner. Store the liner indoors if the weather is chilly.

The liner is ready for use when you can easily ply vinyl on it. Put the liner’s seam around the bottom perimeter of your pool halfway up to the cove.

Hang your liner over the wall and bind it up to the wall’s top using some coping clips. Keep the pool as rigid as possible.

Set Your Liner

After the installation of the liner, you can set the liner. Use a suction pipe to pull the liner up tightly against the pool base and the pool’s floor. Fill up the pool with water. Run the hose via the skimmer hole between your liner and the wall of the pool.

Use your duct tape to adjust the skimmer and return holes to better position the liner. Lay the liner. Whether you’re using a vinyl liner or a metal liner, remove any visible wrinkles by moving your liner around. Push the wrinkles towards the pool wall.

Start filling the pool with water after clearing all wrinkles. Place your garden hose in the middle of the pool floor and shut the hose off after you fill the pool with water to around six inches.

Allow the water into your swimming pool until the water is slightly below the skimmer and return holes. As this process continues, continue installing the waiting top connectors and top rails.

Check your skimmer and return holes, and fix the filter in the right position. Fix your coping strips appropriately to support the vinyl liner and the top rails of the pool.

As you lay the liner, check the stability of the bottom track and the top rails. Ensure your pool liner perfectly fits inside the pool. Check the stability of the rest of the pool. Once everything feels assembled and strongly supported, you can enjoy your new pool.

Understand Pool Liner Installation

The above-ground pool liner installation poses a big challenge to many swimmers who prefer to DIY their ground pools. The challenge comes when the sand wall puts some strain on the pool wall and pool liner.

This happens when you do not station your sand base high enough. The irresistible weight of the water on the pool can blow out your pool wall. This weight can also pull down your metal pool wall.

To avoid these great inconveniences, you must accurately install your pool liner. First, you must understand that manufacturers do not design these liners to withstand the weight and force of water. The purpose of these liners is to line inside the pool.

These liners help the pool to hold water. So, while installing an aboveground pool liner or a new round above ground pool liner, you must use the proper sand base at the proper height.

Avoid any air spaces between your vinyl liner and the pool wall that the liner rests. You can also use different methods to install a ground pool. For example, you can install a pool with a sand cove and a sand base.

Similarly, you can install a pool with a foam cove and a sand base. You can also choose to set up a pool with a wall foam, a liner floor padding, a foam cove and a sand base. Another method of installing a pool involves setting up a pool with a sand base, a liner floor pad and a foam cove.

Anytime you are using sand to create a pool floor, use finer sand particles. Lay a thick layer of sand through the inside of your pool to form a strong base. As you install your liner, construct a sand cove against the wall of the pool.

Create at least a four inches high angle of sand on top of the three inches high sand base. This will yield a sand cove height of seven inches at the base where the metal pool meets the sand base.

This height is reasonable enough for any round above ground pool. You can be sure your pool has enough support all the way around it. A liner with enough support from the pool floor can easily resist any damage and stress to either it or the metal wall.

Once you have installed the sand base with an appropriate height, attach the pool cove. Remove the adhesive behind the pool cove and stick it to the metal pool wall.

The pool wall and its underlying protection matter the most when it comes to the stability and comfort of the people around the pool. You must set up a cover inside the pool to enhance your comfort as you swim and protect the pool’s interior from damage.

Proper alignment of the bottom rails also gives the walls of the pool the necessary support. Coping strips can also protect your pool agent heel marks. Your bottom rails must also be strong enough and well supported.

A strong base that can optimally support your bottom rails should have some fine particles of sand. Sand is really available and does not feel irritating to touch or step. Therefore, sand is a critical component of your wall.

During the installation of your rails, ensure these rails sit on the right plates. You can measure the angle these rails form on the plates where the connectors meet. Use your tape measure to ensure your blocks, uprights, plates, and bottom track make the angles and levels pool designers recommend.

Remember

You must also start the process of building up a pool with the assembly of all the tools you will require. Before you dig out any holes, check the utility lines to prevent any inconveniences.

You can also protect yourself from dangerous gases which can be flammable or explosive. Contact the local authorities and inform them about your intention to set up a pool.

These local authorities have all the details about your home geological structure. Therefore, they can advise you whether you should dg the ground to excavate your pool construction site.

The assurance from the authorities that you can safely excavate your land can protect you from illegal activities. The assurance can make you confident that your installation complies with all the local codes and state laws governing construction.

The arrangement and levels of your bottom rails and patio blocks influence the strength of your wall. A stronger wall needs well-levelled patio blocks. These stakes must conveniently sit on the connector plates. Know when to use sand for your wall base and add some foam cove or sand cove.

Installing oval or round pools is an expensive activity. However, with some time and tools, you can spare yourself a lot of money by installing an oval or round pool at home.

Master the importance of plates in holding stakes. Take advantage of the availability and affordability of sand to create a strong wall for your pool. Only fill the pool with water after you have installed the right pool cove.

Only place your sod on the pool surface after you’ve removed all the particles. Your sod should not cover any stone particles or sand particles. These particles can affect the pool’s level and lower the quality of your pool’s sod or bottom component.

1 Comment
  1. […] cleaning and maintenance can be time-consuming and costly. However, fiberglass pools have a smooth, nonporous surface, making it difficult for algae to grow, as is the case with other […]

Leave a reply

Smart Straw
Enable registration in settings - general
Smart Straw We would like to show you notifications for the latest news and updates.
Dismiss
Allow Notifications