Is Sink Water Distilled?

Best Selling Distilled Water

Water is life. Water is a vital part of your body, and it is necessary to hydrate by drinking sufficient water. There are different types of water that you might have heard of, such as sink water, purified water, and distilled water. You may find it challenging to choose the best water for use.

Although you can quench your thirst with the three choices, purified and distilled water are the cleanest water options. Whereas sink water is treated with chlorine, it is not as pure as distilled and purified water.

So, is sink water distilled? Before then, let’s find out the difference between tap water, bottled water, and distilled water.

Tap Water Safety

Sink water is also known as tap water and is supplied using a faucet and is readily available for use. The source is usually from a river or groundwater and is treated in the water treatment plants.

According to CDC, the US has the safest tap water globally because it undergoes rigorous water safety testing than bottled water.

Therefore, tap water is safe to drink and use for other purposes because it undergoes purification.

In the United States, The Environmental Protection Agency (EPA) is usually in charge of the water treatment process.

Tap water purification involves four common steps.

Step I: Coagulation and Flocculation

Adding chemicals to the water to mix the dissolved solids and dirt particles to form floc, forming larger particles.

Step 2: Sedimentation

Letting the flock settle at the bottom of the tank since it is heavy.

Step 3: Filtration

The clear water from the top of the sedimentation process moves through gravel, sand, and charcoal filters. The filtration process removes impurities such as chemicals, dust, and parasites.

Step 4: Disinfection

Chlorine is added to the filtered water to kill germs, bacteria, and parasites. Fluoride, which helps in preventing tooth decay, is added during this step.

You need to boil or filter the tap water again because it might collect impurities during the distribution process.

Distilled Water

Distilled water is a type of purified water where salts and minerals are removed from the water by collecting vapor from boiling water.

Distilled water is commonly used in research laboratories and medical facilities. You can also drink distilled water.

The distillation method depends on the fact that microscopic molecules and impurities are denser than water molecules. Therefore, only water molecules evaporate during the distillation process.

1. Water Distillation Process

Stage 1. Evaporation

The water will boil at 100 °C evaporating the water molecules. The water steam then passes through the condensation tube, where the water flow in the tube absorbs the heat in the steam.

Stage 2. Condensation

At this stage, the water vapor is changed into liquid water. The condensers compress the vapor until it achieves its maximum saturation limit.

Stage 3. Collection

The condensed water drops are collected in a different clean container.

2. Is Distilled Water the Same As Purified Water?

Distilled water is a type of purified water, and the difference between distilled water and purified water is the methods of purification.

Distilled water goes through distillation while purified water passes through the four steps of water purification: coagulation and flocculation, sedimentation, filtration, and disinfection. Purified water is filtered through deionization, distillation, or reverse osmosis.

Distillation removes minerals such as calcium and magnesium, whereas purified water contains the minerals. Only chemicals and contaminants are removed in purified water.

Therefore, tap water goes through the procedure of purification to make it safe for drinking.

Bottled Water

Bottled water is related to tap water because it has gone through the filtration and purification systems and will contain the essential minerals.

Mineral water, Springwater, and purified drinking water are bottled water types mainly made for drinking.

The water may taste like purified tap water because of the essential mineral content for your health.

After the water goes through the treatment systems, it is stored in bottles for drinking.

Is Sink Water Distilled?

Sink water is not distilled because tap water has been made safe to drink by going through the 4 systems of purification. Sink water has to go through distillation to be distilled.

The article highlights the other reasons why sink water is not distilled

1. The Degree of Purification

Distilled water is pure water molecules. Distilling removes minerals and contaminants. The purification systems of sink water preserve the minerals and only removes chemicals and contaminants.

2. Difference in Taste

The sink water has a different taste from distilled water. The distinct taste of tap water is a sign that it contains metals and minerals in tap water.

3. Uses

Sink water is mostly used for domestic uses, while you use distilled water for medical and research purposes.

4. Sources

Sink water is usually from groundwater, and the Environmental Protection Agency treats and distributes the water. Distilled water is produced from boiling tap water.

How You Can Distill Sink Water at Home

This article shows you the method of making distilled water at home. You will need

  • Aluminum pot
  • Round lid
  • Glass
  • Ice cubes
  • Hot pads

With these items in place, here’s the procedure you should follow

  1. Fill the aluminum pot with tap water until it is partly full. Turn up the heat to medium until the water is hot at 100 °C. Ensure the water simmers between medium and high heat to yield optimum results.
  2. Place the glass bowl in the pot. The glass bowl will collect the water dripping from the center of the inverted lid. You should choose the right size of the bowl to avoid the water dripping into the main pot.
  3. Put the lid upside down, and when heating the pot, the water vapor will rise on the lid, condense and trickle back in the bowl as droplets.
  4. Turn up the heat for the water to get hot. It is not a must for the water in the pot to reach the boiling point.
  5. Place the ice cubes on the top of the lid covering the pot. The ice speeds up the cooling process and helps to condense the vapor into water.
  6. Once done, turn off the flame and be cautious as you lift the bowl of distilled water from the pot.

It would be best if you stored them in a sterile container. You can sterilize the container by immersing it in boiled water to ensure that the water is safe and free from bacteria.

Ensure that the containers can keep the distilled water for a long time to avoid contamination and keep the water safe. You may also purchase home distillation kits that are currently available in the market.

Can Sink Water Replace Distilled Water?

It is suitable for you to drink sink water instead of distilled water because it contains organic minerals.

It is preferable to use purified sink water for long-term use because distilled water is easily contaminated.

However, you cannot replace distilled water in medicine and research because of the sterilized nature of the involved procedures.

Which Is The Best Drinking Water For You?

Drinking water should be safe for drinking, and it should be free from any chemicals and impurities.

The major safety concern with distilled water is the quality of water. The water may contain resilient organic compounds such as pesticides.

These contaminants have a lower boiling point than water. Thus the heat boils off the contaminants first, then the clean water molecules. Thus, to make distilled water safe, you need to purify it more.

Purified sink water is the best for drinking because it has natural minerals beneficial to your health. Distilled water can affect your health because the water leaches on the minerals on the teeth.

Sink water has fluoride, which protects the teeth from cavities. You cannot add fluoride when you distill water.

For these reasons, purified sink water is the best for drinking.

How You Can Purify Sink Water at Home

Purified water is free from bacteria, chemicals, and metals that are toxic to your health. It is preferable to purify your water than buying bottled water, and it is cheaper.

Reverse osmosis is the best way of purifying drinking water. It by using increased pressure to remove most of the contaminants in the water through a semi-permeable membrane.

This article outlines the methods you can use to treat your drinking water from home

1. Boiling Water

This is the safest and cheapest way to purify your drinking water at home. High temperatures kill bacteria and germs, lower water quality, and are harmful to your health.

You should boil the sink water for at least five minutes for it to be safe to drink. The more minutes you boil, the purer the water.

Cover the water, and let it cool before drinking.

2. Filtration

Filtration is the most effective way of improving water quality by using the correct filters to remove impurities.

The filters use physical and chemical procedures to ensure the safety of drinking water. The filters use the technique of chemical absorption to remove impurities.

Filtered water has no contaminants or large compounds that are a risk to your health.

The filters do not get rid of the minerals, and you should filter your water because it is the healthiest method of treating water.

You can also opt for commercial or slow sand filters.

3. Chlorination

Chlorine is a powerful disinfectant used for many years to treat water and kill germs and pathogens that might affect your health.

You can use liquid chlorine or chlorine tablets to treat your water and are effective and affordable. However, you should be careful using this technique if you are suffering from thyroid issues.

4. Solar Disinfection

You can use the heat from the sun to help treat your water, which is an affordable and convenient procedure.

It would be best if you had plastic bottles, direct sunlight, and sink water. Fill the bottle with water until they are almost full.

Shake the bottle for about thirty seconds and fill the remaining part with water. Tightly close the bottle and place it on a site directly on the path of the sun’s rays. Let them sit for 8 hours.

5. Iodinezation

You can use little amounts of liquid iodine or iodine tablets to kill water toxins as a short-term method. For each quart of water, use 5 drops of liquid iodine if the water is clear and 10 drops if the water is cloudy.

You may also use 2 iodine tablets in every quart of water and let it settle for an hour at room temperature. Shake well before you drink.

Bitterness is a sign of iodine residues. Therefore you can add lime or lemon juice to remove the taste.

6. Distilled Water

The purification method of distilled water is effective because contaminated substances such as heavy metals are left as sediments and are easy to remove.

Distilled water is ideal if you might be accessing untreated water. However, processing distilled water is slow and costly. It might be ideal if you are purifying small quantities of water.

Final Remarks

Sink water is not distilled because it comes directly from a faucet, but you can distill sink water. Distilled water has no taste and is majorly used for medical and research purposes.

Purified tap water is closely related to bottled water because it goes through filtration treatment, ensuring that it is safe to drink.

You can search the site of your municipality to check the quality of water in your area. There are various systems you can use to treat water at home and protect your health.

Smart Straw
Enable registration in settings - general
Smart Straw We would like to show you notifications for the latest news and updates.
Dismiss
Allow Notifications