My Bathtub has Rust Spots.

Best Selling Bathtub

While showers are great, a warm soak in the tub is very relaxing, especially if you’re feeling unwell or just exhausted after a long week. However, taking a bath in a tub with rust spots beneath the faucet might be more stressful than soothing.

The brown patches that appear on your tub and sinks are most probably rust, and a variety of factors causes them. Rust occurs when water passes through galvanized pipes that are older and rusted. However, hard water can cause rust caused by the residue from iron and minerals present on the surface. However, the fact remains that it doesn’t matter how or why the rust got there; instead, what matters is that it looks awful and should be cleaned up. Fortunately, these stains can usually be removed relatively easily.

What Causes Rust Stains?

Rust stains can be challenging to remove and can become permanent with time. The following are possible causes:

Plumbing System

Having rust particles in your water supply can occur due to rusty or deteriorated water heaters, fixtures, or pipes. Additionally to the damage to your home, a professional, licensed plumber should address a health concern as soon as possible. In either case, the issue may be caused by corroded pipes or a malfunctioning water heater.

Water Supply

Generally, if the water entering your home has sufficient iron, the water will taste and look normal, but rust stains will form in areas where standing water is prevalent, such as the toilet bowl. You can have your water tested or speak with a professional, licensed plumber to remedy your water issue. An abundance of iron deposits is a sign that you should install a softener or filter.

What You Need to Know About Removing Rust Stains from Bathtubs

Various materials can be used to make bathtubs, such as acrylic, enamel, and porcelain. Therefore, cleaners will react differently to different tubs. For example, enamel tubs may be damaged by acidic substances like vinegar, while acrylic tubs are generally bleached. Therefore, you should understand the proper way to clean your Bathtub based on the material it is made from. In addition, you should always try to remove rust stains by performing a spot test with both products and cleaning tools on an inconspicuous area of your tub before you begin the cleaning process.

Here are five ways to remove rust from your tub and sinks

If you wish to remove rust stains, factors such as the type of surface you have (acrylics, porcelains, or enamels) and how long the discolouration has been there may affect your success. If a stain has been present for a long time, the colour may be permanently embedded in the porcelain, making it impossible to remove. If you plan to use any of the methods listed below, make sure to do a spot test in an inconspicuous place, such as the sink, shower, or toilet. Among the options for removing rust stains are:

  1. Use a rust remover. Several different products on the market claim to remove rust on contact, which is probably pretty obvious, and if you’ve spent any time in the cleaner aisle of your supermarket or hardware store, you know this. There’s no scrubbing required with most rust removers since they immediately oxidize the rust. All you need to do is rinsing it away, and then your sink or tub looks fantastic. However, many homeowners avoid using rust removers from the store because they contain harsh chemicals that leave harmful fumes and make them dizzy. If they’re mishandled, these products can even cause skin burns. Additionally, environmental protection is becoming increasingly important for many consumers. If that’s the case, you might want to try another method.
  2. Use Shaw’s Pads. Shaw’s Pads can be an effective, inexpensive, and environmentally friendly solution to cleaning up porcelain and ceramic stains if you don’t mind a little elbow grease. Plumbers recommend it since it works well and doesn’t leave scratches on walls. If you are unable to locate them at your local hardware store, they are available online.
  3. Use pumice Stone. Additionally, a simple pumice stone works as an excellent rust remover, especially when it comes to porcelain since it doesn’t scratch or damage the surface. First, the stone should be soaked, and the rusty surface should be wetted. The stone should then be rubbed lightly over the rusty surface.
  4. Use lemon juice and salt. You can clean off the rust from your kitchen or bathroom with only two pantry staples, and the space will smell lemony fresh at the same time. First, create a paste of salt and enough lemon juice (bottled will work) to achieve a thick consistency. The paste must be applied to the rust and left to sit for at least 15 to 20 minutes. After that, it can be scrubbed with a scrubber sponge.
  5. Use baking soda and vinegar. Next, prepare a paste using two other pantry staples: three parts baking soda and one part vinegar. Use baking soda and water to make a thick paste and apply to the affected area(s). After letting the mixture sit overnight, scrub with a toothbrush or a microfiber cloth and then rinse thoroughly with clean water. Use a scrub sponge to apply it to the rusty surface and sit for at least an hour. If it was more severe, you might have to repeat the procedure. When it has been rinsed off, the rust should have disappeared.

Smart Straw
Enable registration in settings - general